FEATURES
- 3D models available
- Gearhead ratio 96:1
- Leadscrew TPI 80:1
- Not vacuum compatible
When ordering multi-axis units the completed assembly will include all necessary braces, kits and hardware
GENERAL DATA
- Load Capacity: 0.45 kg (Direct Top Load)
- Angular Travel: ±0.175 rad
- Body Size: 61.5 x 31.4 x 17.7 (mm)
- Table Radius: 25 mm & 32 mm
- Center of Rotation: 14.2mm & 32 mm
GENERAL PRECISION
- Sensitivity: 0.6 µrad/encoder count at center
Product Selector
NOTE: If viewing on a cell phone, landscape mode is recommended.
3D models available
Specifications: |
MM-3M-G-25 View Schematic |
MM-3M-G-42 View Schematic |
---|---|---|
Radius: | 25 (mm) | 42 (mm) |
Repeatability: | <100 µrad | <100 µrad |
Accuracy: | +0/-250 nm/10µm move | +0/-250 nm/10µm move |
Backlash: | <150 µrad | <150 µrad |
Moment Load: | 6 to 12 oz-in (42 to 84 mNm) |
6 to 12 oz-in (42 to 84 mNm) |
Load Capacity | ||
Direct Top Load: | 0.45 kg (16 oz) | |
Pitch: | 6 oz-in (42 mNm) | |
Roll: | 6 oz-in (42 mNm) | |
Yaw: | 12 oz-in (84 mNm) | |
Gearhead Ratio: | 96:1 | 96:1 |
Max Speed @ 4.5 Vdc/no load: | 40 mrad/sec | 25 mrad/sec |
Encoder conversion: | 0.6 µrad/count at center | 0.3 µrad/count at center |
Resolution: (view resolution data sheet) |
3.0 µrad | 1.5 µrad |
Gearhead Backlash: | no load <3 deg. | no load <3 deg. |
Motor: | dc Servo, brush type (MTR-6-50E-4.5v) | |
Travel Range: |
±10° | ±10° |
Center of Rotation: | 14.2 mm from top surface | 32.0 mm from top surface |
Stage Body -X single axis: | 61.5 x 31.4 x 17.7 (mm) | 61.5 x 31.4 x 17.7 (mm) |
Weight w/single axis | 50.8 g | 50.8 g |
Stage Body -XY 2 axis: | 61.5 x 61.5 x 35.5 (mm) | 61.5 x 31.5 x 35.5 (mm) |
Weight w/2 axis | 102 g | 102 g |
The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.